What is Clamper, Definitions, Advantages & Disadvantages

Authored By: Ankita Prajapati

Clamping is an electrical circuit control process used to limit the amount of current that can flow through a circuit. Clamping is also known as overvoltage protection and is commonly used to protect electronic components from damage caused by excessive voltage or current.

Clamping is achieved by using either a clamping diode or a clamping circuit. A clamping diode is a special type of diode that limits the voltage across a circuit.

When the voltage rises above a certain level, the diode turns on and diverts the current away from the circuit, thus preventing any damage to the components.

A clamping circuit is a combination of passive components such as resistors and capacitors that are used to limit the amount of current that can flow through a circuit.

The circuit works by limiting the voltage to a level that is lower than the maximum voltage that the components can handle. This ensures that no damage is done to the components due to excessive voltage or current.

Clamping is used in a wide variety of applications including power supplies, switching regulators, and audio amplifiers. 

Signup on YourEngineer and get 1000 Engicoins instantly.

Increase your Exposure in Electrical & Electronics Engineering.
Join Electrical & Electronics Central Network

campus cover

Advantages

  1. Clipper ships are very fast, making them ideal for longdistance trade and exploration.
  2. Clipper ships are very maneuverable and can navigate in shallow waters and around obstacles.
  3. Clipper ships are relatively inexpensive to build and maintain
  4. Clipper ships are relatively fuelefficient, making them cost effective for longdistance voyages.

Disadvantages

  1. Clipper ships are not wellsuited for carrying large amounts of cargo, as they are not very stable in the water.
  2. Clipper ships are more prone to capsizing in rough seas due to their light construction.
  3. Clipper ships are not wellsuited for winter voyages, as their light construction makes them vulnerable to ice damage.
  4. Clipper ships are not wellsuited for navigating shallow waters, as their high center of gravity can make them unstable in high seas.

Signup on YourEngineer and get 1000 Engicoins instantly.

Conclusion

Clamping is also used in automotive and industrial applications such as motor control and overvoltage protection. Clamping is an important part of circuit protection and can help to prevent expensive repair costs in the event of a circuit overload. Clamping is an electrical circuit control process used to limit the amount of current that can flow through a circuit.

Clamping is achieved by using either a clamping diode or a clamping circuit and is commonly used to protect electronic components from damage caused by excessive voltage or current. Clamping is used in a wide variety of applications and is an important part of circuit protection. However, it can be expensive to implement and may not be suitable for some applications.

Increase your Exposure in Career in Engineering.
Join Career Central Network

campus cover

What is YourEngineer?

YourEngineer is the first Engineering Community Worldwide that focuses on spreading Awareness, providing Collaboration and building a focused Career Approach for Engineering Students.

Deep dive into Engineering, Join millions like you

campus cover
  • Create an Account and Earn 1000 Coins
  • Pass a Quiz and Earn 20 Coins
  • Earn 10 Coins for Daily Visit 
  • Earn 50 Coins for invite someone to join a group
  • Earn 100 Coins for finishing a course